How to Restring a Compound Bow

The bowstring is something that you should consider when you own a compound bow. The string will comprise of the smaller strands that have been draped together to form the sturdy string that we get to use the compound bow. Depending on the type of string, it is often able to withstand a hundred pounds of force or more. The string is supposed to last the lifetime of the bow, however, sometimes that is not always the case. With no proper maintenance, you might end up with a bowstring that does not work as expected. When this happens, there is the need to restring your compound bow.

Whenever the bowstring loses its strength or worn out, it is the reason you need to do the restring process. Once you get the bow restringed, it is when you can easily use the compound bow without worrying about it not performing to your expectations. We get to look at how you can easily restring the compound bow to make sure that it is all good for hunting again.

What you will need

  • A new bow string
  • Allen wrench


  1. Locate the limb bolts of the bow and insert your Allen wrench in the bolts. The limbs of the bow connect to the riser using these limb bolts. You need to turn the bolts one after the other in the anti-clockwise direction. You have to make three full revolutions so that you take off pressure from the limbs.
  2. By using your feet, step on top of the bowstring. Proceed to pull up the bow riser using your hands. Keep pulling to allow for the bow to attain the full draw position.
  3. Using one hand, hold the riser and then use your other hand to put the replacement bowstring’s end on the teardrop fittings. The teardrops fittings would be found on the both ends of the new bow’s string. Lower the compound bow until you see that limbs are in the default position.
  4. Check the bowstring loops so as to ensure they are seated fully and they are also properly in the grooves. The grooves are part of your new bowstring fittings.
  5. By using both feet, you can now step on the replacement bowstring and then proceed to pull the bow riser and do not stop until you see that it has attained the full draw position.
  6. It is now safe to take out the bowstring you are replacing from the fittings. Once that is done, you can now lower compound bow. Using the Allen wrench, proceed to tighten the limb bolts.

From this procedure, you can see that the process of restringing the bowstring is not hard. You simply have to follow it correctly and you should have the string switched out in no time. If you are unsure, you can always consider taking it to a top professional archery shop.

Now that you have restringed the compound bow, you still want to make sure that it can deliver the best performance without necessarily breaking the new string again. Having broken or stringing the bowstring incorrectly can lead cases of injuries to the user. The best thing to do would be watching out for any signs for the need to restring the bow.

Here are a few tips that will help know if your compound bow needs restringing.

  • Inspect the bowstring most of the time. As part of the maintenance routine, you need to do a proper inspection of the bow to make sure it is in great condition. Check the bowstring more often as it is an area of interest at this point.
  • You need to look for the obvious signs of fraying or breaking. Whenever you take a closer look at the bowstring, you will see some of the signs of fraying as you will be using the part more often for shooting the arrow. If you see that the signs are undeniable, you simply have to replace the bowstring.
  • You need to check the string at the cams point for any signs of damage. If the damage is not noticed in time, the smaller damage can easily lead to a bigger problem. The cams point is where you can also expect to see more cases of fraying.
  • Keep an eye on the bow’s draw length. You must by now know the expected draw length of your bowstring. Whenever you get that your bowstring is abnormally long, then you can know it is a sign that it is time to do a bowstring replacement.
  • Conclusion

    Whenever you are working on the bowstring, make sure that you keep the safety on at all times. This helps to prevent any accidental misfire or any other possible injuries associated with it. From the tips and the process of restringing the bow, you should be good to go.

Add a Comment

Your email address will not be published. Required fields are marked *